|
Home > Industrial > Architectural Panels, Concealed Fastener > Stand 'N Seam
Stand 'N Seam Metal Roofing
- A high-performance, structural standing-seam roof system for the most demanding applications. Test reports confirm that Stand 'N Seam has the highest wind uplift resistance of any standing-seam panel available in the market
- Unique one-piece stainless steel clip design does not fold into side joint of panel, allowing unrestricted thermal movement
- Side joints are double lock-seamed with electric seaming machine ensuring weathertightness
- Factory or field-formed by portable roll-former provides continuous long-length panels from ridge to eave and eliminates unsightly end-laps. Field forming available by qualified Fabral operators
- Factory applied sealant is standard
- ASTM E1592 and Multiple UL90 ratings in both steel and aluminum for applications over open framing or solid substrates
- Fully tested performance for air and water infiltration
- Multiple UL fire resistant assemblies available and Class A fire rated
- Minimum roof slope: 1/2:12
- Available widths: 12" and 16"
Wind uplift |
UL90 |
#275, 275A, 275B |
|
ASTM E1592 |
24 ga. allowable load of 69.70 psf @ 5' |
|
ASTM E330 |
24 ga. allowable load of 95.76 psf @ 2.5' |
|
|
22 ga. allowable load of 87.88 psf @ 5' |
|
|
.032" AL allowable load of 48.48 psf @ 5' |
|
|
.032" AL allowable load of 66.67 psf @ 2.5' |
|
|
.040" AL allowable load of 66.67 psf @ 5' |
|
|
.040" AL allowable load of 82.42 psf @ 2.5' |
Air infiltration |
ASTM E283 |
.006 @ 20 psf |
|
ASTM E1680 |
0.00 @ 20 psf |
Water penetration |
ASTM E331 |
no water @ 20 psf |
|
ASTM E1646 |
no water @ 20 psf |
Home > Industrial > Architectural Panels, Concealed Fastener > Stand 'N Seam
|
