 |
 |
 |
 |
|
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
 |
|
 | |
 | |
 |
|
|
|
 |
|
 |
|
|
Structural MembersFabral manufacturers light gauge cold-formed steel sections, sometimes referred to as secondary framing members, for use in secondary steel framing applications. Various standard sections are available including but not limited to Zees, Cees, Eave Strusts, Channels and Angles. Steel sections provide economic secondary structural framing for pre-engineered metal buildings, carports, canopies, walkway covers and eyebrow canopies. They are also used as the primary structural framing of single story mini-storage structures. Custom shapes are available. The sections are available in 16 Gauge (.060")*, 14 Gauge (.077")* and 12 Gauge (.099")* thicknesses. These sections are available with either a red-oxide prime or hot-dipped galvanized protective coatings. Red oxide members are manufactured from ASTM-A570 Grade 55 steel (55,000 PSI minimum yield strength). The Red oxide coating number is TT636. Galvanized members are manufactured from ASTM-A653 G-90 Galvanized Grade 55 steel (55,000 PSI minimum yield strength). Fabral's manufacturing capabilities produce zee purlins to symmetrical or asymmetrical designs. Eave struts can be produced for high and low eaves and are available in single and double slope configuration. Refer to the standard structural section guide for a listing of standard member sizes and shapes. Standard and non-standard web and flange punching patterns are available. Standard punching patterns include simple span, short lap, long lap and Pattern A web punch patterns. Custom punch patterns are available upon request with some limitations. Secondary Structural Member Specs (for Fabral Salem, OR Facility) Structural Member Benefits:
|
|