STAND ‘N SEAM ®
Product Overview
High performance, mechanically seamed roof system for the most demanding applications. The panels can be roll-formed and curved, spanning the entire roof without any end seams.
Panel Specs
- Unrestricted Thermal Movement
- Double Lock-seamed Side Joints
- Factory or Field-forming
- Taper Options Available
- Factory Applied Sealant
- Substrate Offering: .032″ and .040″ Aluminum and 24 Gauge and 22 Gauge Steel and Copper
- Maximum Panel Length: Factory Forming Option 47′
- Minimum Panel Length: 6′
Technical Data
- Min Roof Slope: 1/4:12
- Hail Resistance: UL2218, Class 4
- Fire Resistance: UL790, Class A
Resources:
- Stand N Seam Brief Spec Page – Sell Sheet
- Stand N Seam Spec Page – technical
- Additional resources and technical documents
Installation Videos:
Installing Stand N Seam Panels:
Part 1
Part 2
| Test Data | ||
|---|---|---|
| Wind Uplift | UL90 | #275, 275A, 275B |
| ASTM E330 | 24 ga. allowable load of 95.76 psf @ 2.5′ | |
| 22 ga. allowable load of 87.88 psf @ 5′ | ||
| .032″ AL allowable load of 48.48 psf @ 5′ | ||
| .032″ AL allowable load of 66.67 psf @ 2.5′ | ||
| .040″ AL allowable load of 66.67 psf @ 5′ | ||
| .040″ AL allowable load of 82.42 psf @ 2.5′ | ||
| Air infiltration | ASTM E283 | .006 @ 20 psf |
| ASTM E1680 | 0.00 @ 20 psf | |
| Water penetration | ASTM E331 | no water @ 20 psf |
| ASTM E1646 | no water @ 20 psf |
