IP SNAP 3
Product Overview
Trapezoidal panel design is mechanically snapped and works well for low-slope industrial applications and high performance, pre-engineered metal buildings.
Panel Specs
- Snap-Fit Panel
- Factory Applied Sealant
- Substrate Offering: 24 Gauge and 22 Gauge Steel
- Maximum Panel Length: 47′
- Minimum Panel Length: 6′
Click here to view additional resources and technical documents
| Wind uplift | UL90 | #93, 210A |
|---|---|---|
| ASTM E1592 | Results vary depending on Gauge and Thickness | |
| Air infiltration | ASTM E283 | .006 @ 20 psf |
| ASTM E1680 | 0.00 @ 20 psf | |
| Water penetration | ASTM E331 | No water @ 20 psf |
| Water penetration | ASTM E1646 | No water @ 20 psf |
| Minimum Roof Slope | 1/2: 12 | |
| Available Widths | 24” | |
| Standard Lengths | 6’ to 47’ |
